1. Establish rules and regulations for machine maintenance. The maintenance of the offset printing machine should be based on the instruction manual of the machine. Such as regular oil change, filter cleaning, regular inspection of machine accuracy, etc.
2. Strengthen the maintenance of important components. Gears, cams, sprockets, rollers and bearings are the most important parts on the printing press, and their maintenance is different from other parts, because changes in their accuracy will affect the final. Springs are the most used parts for force balancing mechanisms on machines. The quality of their work directly determines the precision of the mutual cooperation of moving parts. extremely unfavorable. If the above problems are found, the spring needs to be replaced immediately.
3. Carry out technical reform and strengthen machine maintenance. Machine maintenance requires the convenience of machine maintenance to be fully considered when the machine is designed. However, due to the complexity of the printing machine, it is obviously impossible to take every factor into account, and the content of machine maintenance will also change as the environment changes. Therefore, it is necessary to improve those structures that are not conducive to machine maintenance without affecting normal work.
Video Introduction
Below is a video introduction to how a 4+4 colors woven bag ci flexo printing machine works.
