Before the operation of the flexographic printing machine, it is very important to do the relevant preparations, so what preparations should be done before the operation of the flexographic printing machine?
1. Ensure that the leader is responsible for supervising the safety of machinery and equipment and crew operators.
2. Before the operation, the operator must wear the overalls, work caps, and work shoes neatly, fasten the placket and cuffs of the clothes, and do not put sundries in the pockets, and do not wear watches and various accessories.
3. Before starting the machine, add the required lubricating oil (grease) to each oil filling point, lubricating point and oil tank of the machine.
4. Without approval, non-crew members are not allowed to start or operate the machine. Assistants and apprentices should work under the guidance of the leader.
5. Before starting the machine, you should check whether there are debris in various parts of the fuselage. You must first give a signal (press the safety bell), echo back and forth, and make sure that the surrounding area of the machine is safe before turning on the machine.
6. Before the machine is running, it should be counter-pointed for several weeks, and then punctual for several weeks, so as to avoid debris between the rollers from damaging the blanket, printing plate, etc.
Therefore, preparations should be made before the operation of the flexographic printing machine.
video introduction
