The structural feature of the unit type flexographic press is that each printing unit is independent of each other and is arranged in a straight line along the horizontal direction. The main motor is located at the rear of the die-cutting unit with the largest load, and then transmits power through a common driving axial unit at the rear of the machine. Therefore, this model can determine the number of printing units according to the specific requirements of users, up to twelve units, that is, 12 color printing can be realized. This feature of the unit flexographic press has many advantages, such as good accessibility, short preparation time before printing, etc. In the United States and Canada, this narrow width unit flexographic printing machine has occupied most of the market in the industries of self-adhesive, small folding carton, commercial form paper, bills, tags and soft drink packaging. In recent years, the packaging and printing market has shown a new trend. Manufacturers continue to introduce new packaging designs, and the printing quantity of each product is also relatively reduced, which provides a better opportunity for flexible unit flexo printing machines. The foreign packaging and printing industry customarily calls the flexographic printing machine a "conversion machine" because it is not only easy to convert, but also flexible.
1. The narrow-width unit flexo printing machine can complete multiple processing processes such as printing and die-cutting in one pass. If equipped with an EDM processing system, the narrow-width flexographic printing machine can also print plastic films.
2. Using the online self-adhesive compound stripping-printing-recombination device, the required information can be printed on the inner side of the self-adhesive label.
3. If the non-stop automatic roll changing device is adopted, the problem that the flexo printing machine will affect the use efficiency due to the downtime of the roll change can also be solved.
4. A flipping frame is installed between the printing units, which can realize double-sided printing of the substrate. The flipping frame can be placed between any two printing units according to the specific process needs.
5. The printer can also use the number machine to print the number on the substrate.
6. If a UV curing system is installed in the last unit of the machine, UV glazing can be applied to the printed product.
7. If all units are equipped with UV curing system, the machine becomes a flexographic printing machine that can print with UV ink.
8. The narrow-width unit type flexo printing machine can adopt various processes and supporting devices for the subsequent line processing according to the processing order of the printer. For example, bronzing, laminating, die-cutting, creasing, punching, breaking, fan-folding, slitting, etc.
9. For die-cut or cross-cut finished products, a finished product collection table equipped with a counter can be used to collect them.
10. A stroboscope or even a computer-colored monitoring system can be installed at an appropriate position at the rear of the machine, which is convenient for the operator to monitor the quality.
Video Introduction
Following is the workflow of inline flexographic printing machine.
Detail Image
