During the printing machine, if the juvenile printing machine occurs, it may affect normal printing. Therefore, it is very important to find out the problem in time and solve it. What about it?
The tiny drip of ink, the phenomenon of flying scattered in the air is called "flying ink", also known as the fog of ink, which is the most common failure of high -speed rotation convex printing printer. To slow down the phenomenon of "flying ink", it can increase the humidity of the printing workshop and use inks with conductive inks such as water -based ink.
During the printing process, the paper is not easy to separate, the paper collection on the paper collection table is not uniform, or the paper on the paper is crooked and the printing is not accurate. It may be caused by static electricity. Eliminating printing static electricity, generally installed electrostatic eliminations on the printing machine to make the air ionization around the printing machine, thereby neutralizing the positive and negative static electricity on the paper. You can spray an appropriate amount of water mist on the surroundings of the printing machine or the back of the roller to eliminate the static electricity on the paper. In addition, the humidity of the printing workshop is conducive to the elimination of static electricity.
The seal of the ink refers to the phenomenon that can be seen on the back of the print. To prevent the transparent printing of the ink, you can choose a tight paper printing, which can also increase the viscosity of the ink and appropriately reduce the printing pressure.
