The reasonable operation of the flexographic printing machine is very important, so what are the requirements for the operation of the flexographic printing machine?
1. Use special materials, and use professional anti-cut gloves for grinding the scraper; when starting the equipment, you need to whistle to notify the relevant personnel to pay attention; during the operation of the equipment, you cannot touch the guide roller with your hands, and do not wear gloves to scrub the ink at both ends; after starting the machine, you want to adjust The scraper or pick line must be handled by the machine; foreign objects on the rubber roller must be stopped during operation; do not pull the partition film by hand when the paper connection fails; the upper and lower embossing rollers need several people to load and unload at the same time to input the correct layout; clean up at any time Ink on the ground to avoid the operator from falling.
2. Work clothes, labor insurance shoes and work caps must be worn before starting work; it is strictly forbidden to wear ornaments, rings, watches, etc.; check the status of the equipment and whether the safety shutdown facilities are normal before operation; turn on the power switch and turn on the compressed air switch to check the button status of the equipment correct; check that the induced air and cooling water temperature systems are functioning properly.
3. Reset all the buttons of the equipment; press down the switch of the pressing roller, the rubber roller is locked; turn off the electric switch and compressed air; take all the raw materials and ink back to the warehouse and do not stay on the machine to clean the ground in time.
Therefore, flexographic printing presses must meet these requirements when operating.
